This kit allows the removal of the Exhaust Gas Recirculation valve on the following vehicles.Volkswagen:Beetle 2002-2010 with the BEW or ATD 1.9 Diesel engine.Camper 2004-2010 with the BRR or BRS 1.9 ..
The Splitter is a truly remarkable valve that gives a combination of blow off and recirculation valve operation all at the same time and has been specifically designed for the many turbo engined appli..
note photo shows black and gunmetal finishes - gunmetal is obsolete and replaced with a polished alloy finishThis turbo recirculation valve is the result of of 25 years of experience and engineering e..
Two silicone boost hoses, turbo to intercooler and intercooler to intake manifold. These are available in a choice of colours and are made to withstand the greater pressures often found on tuned vehic..
This silicone hose fits the Audi S3, SEAT Leon Cupra and Golf ED30 2.0 litre FSiT engines. It runs between the diverter valve ( located at the front of the engine) and the air intake ( rear of engine)..
Silicone tubing with an internal diameter of 4mm. Ideal for vacuum applications and available in a choice of colour. This product is sold in precut 1 metre lengths.For longer lengths or 15 and 30 metr..
A five Piece Silicone Hose kit for VAG 1.8 T 150hp enginesPlease be aware that these hoses were patterned from right hand drive vehicles. Whilst we believe these to be correct for left hand drive vehi..
A five Piece Silicone Hose kit for VAG 1.8 T 180hp enginesNOTE: Engine code ATC and the TT with the AJQ engine code (despite being rated at 180 HP) requires the use of FMKT006Please be aware that thes..
A 7 piece silicone hose kit to replace the coolant hoses on a VAG 1.8T Golf / LeonPlease also see our Turbo hoses FMKT005 / FMKT006 to compliment these hosesPlease be aware that these hoses were patte..
This actuator is designed specifically as a direct replacement for the MK5 VW Golf which utilises the 2.0 litre FSiT engine.This wastegate actuator, if assembled with the yellow colored spring, which ..
This actuator is designed for the Volkswagon Group 90-150 bhp 1.9 PD engines that are transversely mounted and fitted with the Garrett© VNT turbocharger. (not suitable for 2 litre engines)The actuator..
This actuator is designed for the Volkswagon Golf and Polo 1.8T engines that are transversely mounted.This product is built with a predetermined actuator spring suitable for at, or slightly above fact..
This actuator is designed for the SEAT Ibiza 1.8T engines that are transversely mounted.This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost leve..
This quickshifter allows you to shorten the movement of your gear shift in order to obtain the optimum shifting times required for performance driving . You can personally customise the throw to suit ..
This alloy non-resonated boost hard pipe replaces the turbo resonated turbo outlet pipe ( runs from the turbo down the left hand side of the engine) on the 1.8T 225 hp engines as found in the Audi TT ..
Designed by Forge to replace your OEM intercoolers this all alloy intercoolers is an easy installThe Forge intercooler is 27mm X 5 MM X 15MM bigger than the OEM....... and with excellent air flow char..
Replacement silicone hoses for the diverter valve to turbo boost pipe and the N75 hose..
The much loved 1.8T engine has proved itself as being not only being very capable in producing high power figures but in being very reliable at the same time. The key to this reliability is the lubric..
A Big Brake kit with 6 pot calipers and 356 x 32mm ventilated discs. The discs are drilled and grooved to remove braking residuals and maintain optimum performance. Included in the kit are Forge braid..
Yet another first for the Volkswagen and Audi Tuning Market from Forge ! With the introduction of the VAG 1.4 litre TSi Turbo / Supercharged Engine, we have developed an Atmospheric Blow-Off adapter s..
Yet another first for the Volkswagen and Audi Tuning Market from Forge ! With the introduction of the VAG TSi Turbo Engine, we have developed a Patented Atmospheric Blow-Off adapter specifically desig..
This valve has been specifically designed for the Audi A1 1.4 Turbo (122hp) engine. This is a full replacement atmospheric blow-off valve that integrates seamlessly with the OEM electronics and result..
Yet another first for Forge Motorsport !This valve kit allows the fitment of a fast response blow off valve on the 1.2 TSi engine as found in the SEAT Ibiza ( Mk5). As the engine does not have a diver..
This Forge valve kit is for VAG vehicles equipped with the 1.4 Tsi twincharged ( supercharged and turbocharged ) engines that have the electronically controlled bypass valves ( 2 bolt fitting). It is ..
Forge Motorsport are pleased to announce the release of an all-new blow-off valve option for the 2.0T FSI and TSI engines, including the latest engines, fitted with the IHI turbo, (or 1.4T using addit..
For all those wishing to install a boost gauge to their 2.0 litre FSiT engines (suitable for all VAG TSI and FSI turbo engines ),we have a CNC inline take off, which is installed on to the inlet manif..
A set of three silicone boost hoses complete with alloy couplers for the Vag 1.9 PD 150 diesel engine as fitted to the SEAT Leon.Please note: the "O" ring seals from the original couplers should be re..
This adaptor palter installs between the boost sensor and mounting surface to allow a tapping to run a vacuum operated valve or for connection to a boost gauge...
This is a Boost Tap Manifold for VAG 3.0 Supercharged engine as found in 2010 onwards S4 S5 Q5 A6 A7 3.0T. It will allow connection of a boost gauge to these engines with the minimum of effort...
Replacement re-inforced silicone breather hoses for the VAG 150/180 BHP 1.8T engines. A known problem is the failure of the OEM rubber hoses after prolonged exposure to engine oil and fuel vapours. Th..