Engine

The Splitter is a truly remarkable valve that gives a combination of blow off and recirculation valve operation all at the same time and has been specifically designed for the many turbo engined appli..

note photo shows black and gunmetal finishes - gunmetal is obsolete and replaced with a polished alloy finishThis turbo recirculation valve is the result of of 25 years of experience and engineering e..

Two silicone boost hoses, turbo to intercooler and intercooler to intake manifold. These are available in a choice of colours and are made to withstand the greater pressures often found on tuned vehic..

Silicone tubing with an internal diameter of 4mm. Ideal for vacuum applications and available in a choice of colour. This product is sold in precut 1 metre lengths.For longer lengths or 15 and 30 metr..

This alloy non-resonated boost hard pipe replaces the turbo resonated turbo outlet pipe ( runs from the turbo down the left hand side of the engine) on the 1.8T 225 hp engines as found in the Audi TT ..

Replacement silicone hoses for the diverter valve to turbo boost pipe and the N75 hose..

The much loved 1.8T engine has proved itself as being not only being very capable in producing high power figures but in being very reliable at the same time. The key to this reliability is the lubric..

These adaptors are CNC machined from alloy billets and will eradicate the issues of the original plastic block conections breaking. The Cam cover breather installs into the OEM barb. ( pull out the or..

This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us ..

These silicone hoses (3) replace the lower inter cooler hoses as found on the 210 / 225 1.8T engines with the twin wheel arch mounted intercoolers...

The 225/210 hp 1.8T engines as fitted in the MK1 Audi TT, Seat Leon Cupra R and Audi S3 have a organic rubber hose on the intake manifold that feeds the brake vacuum system. This hose is prone to fail..

Secondary air injection system blanking plate Manufactured from high quality aluminium and supplied with Viton O ring and stainless steel bolts. Fitting this plate allows for elimination of the second..

A set of three silicone hoses that replace the breather hoses on the 225hp 1.8T engine with engine code BAM , it will also fit equivalent engine codes which have the same Suction Jet pump layout, plea..

A silicone re-inforced cam cover breather hose for the 1.8T 210bhp engine. With the original fitment hose prone to splitting, this hose is a fit and forget solution. Please note that this is for engin..

A silicone re-inforced cam cover breather hose for the 1.8T 225hp engine. With the original fitment hose prone to splitting, this hose is a fit and forget solution. Please note that this is for engine..

After encountering the collapse of the OEM intake air hose on the Audi S3 (210 & 225) and TT 225 engines (this typically occurs around 5000rpm) that had been re-chipped, our development team set a..

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by your turbochargerThis design was created by the Forge development team on the Forge VW Golf MK1 Race car in the..

This single silicone hose fits between the metal pipe from the turbo down to the first intercooler on the VAG 210/225 hp four cylinder 1.8T engines.This hose is the ideal addition to our (FM225DVRLK) ..

This breather hose is available in red, blue or black and is the perfect compliment to the other hoses we produce for the Audi TT, S3 and SEAT Leon Cupra R, with the 225/210hp 1.8T engines. As always ..

This hose fits directly to the turbo on the 1.8T 210 and 225 engines. It is made from high temperature resistant flourosilicone compound and nomex reinforced to withstand the high pressures that may b..

This alloy tube is fitted with an alloy boss to accept the MAP sensors, as found on VAG vehicles. The housing will fit the larger and smaller sensors, by using the size reducer supplied. This tube is ..

Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit.Your valve tuning kit you will find four springs and three spacers.The strongest spri..

A set of 6 silicone hoses for the carbon canister on the Mk1 Audi TT 225 hp (8N) available in red,blue or black.Not for Cupra R..

A replacement Silicone hose for VAG 225 engine. This hose connects to the N75 valve on the 225hp 1.8 T engine.These are available in either red, blue or black, simply select your choice in the options..

This Servo hose is a replacement on the Audi TT 225 (8N), the Seat Leon Cupra R 225 and the Audi S3 210/225hp.Available in either red,blue or black...

Includes the necessary parts to raise your fuel rail for larger injectorsThis pair of injector spacers, for use on the 1.8T, works perfectly when upgrading to the larger bodied injectors. This set inc..

300% Stronger than standard timing beltsTiming belts are toothed drive belts that transmit rotational force from the crankshaft to the camshaft. Unlike standard accessory belts, they also synchronize ..

Perform the highest-quality oil change in your 1.8T engine using these Genuine VAG Parts.Regular oil and filter changes protect your engine from abrasive wear.The oil in this kit is genuine Quantum Lo..

Integrated Engineering is proud to manufacture the highest quality connecting rods available for European applications, at a reasonable price. This is accomplished through careful design, manufacturin..

Integrated Engineering is proud to manufacture the highest quality connecting rods available for European applications, at a reasonable price. This is accomplished through careful design, manufacturin..