BriteGel is a sticky, lemon and lime scented, non acidic wheel cleaning
gel that clings to the wheel surface enabling maximum penetration into
the dirt, grime and brake dust on your alloy wheels. The sticky gel
formula clings to the alloy and tyre with no run off giving you a
increased time to clean your wheels thoroughly and leaves no waste! A
powerful cleaning gel formula that provides superb foaming, powerful yet
gentle cleaning and great rinsing.
Combined with the stickiness
of Britegel and performance this is certainly the best wheel cleaner we
make here at Autobrite Direct and certainly one of the best on the
market today. Its ease of use is outstanding and in most cases when
cleaning your wheels you simply need to spray and rinse and most if not
all the dirt is gone! In extreme cases heavily brake dusted wheels may
require additional agitation. BriteGel is also wax friendly and wont
affect your existing wheel waxes and sealants.
Britegel is ready
to use and requires a heavy duty trigger (BriteGel Trigger) to dispense
it. The trigger supplied gives an even, thick covering ensuring total
coverage on the surface with no run off and no waste! A pH balanced gel
formula with powerful cleaning capabilities that is suitable for any
wheel surface, even the most delicate alloy wheels on the market today
such as bare metal, chrome, steel or un protected, un-lacquered
surfaces. A quick and easy way to clean your alloy wheels and tyres.
BriteGel certainly makes light work and transforms your wheels like new.uper Sheen is a superb interior and exterior dressing for all plastic,
vinyl and rubber surfaces. It leaves a rich gloss and super shine to all
surfaces with minimum effort. Ideal for interior plastics, exterior
plastics, under arches, tyres & engine compartments, It produces a
longer lasting shine that puts the finishing touches on any detail. Can
be applied using the supplied spray trigger or using a trim dressing
applicator.
Dries in minutes and leaves a high gloss non tacky/greasy surface.
HOW TO USE
One wheel at a time, apply BriteGel liberally and evenly to the wheel
and tyre completely covering the wheel with product. Allow the product
to dwell for a couple of minutes, this will soften the dirt & grime
and start to pull of in a dirty, black residue. With your DBS brushes,
spray BriteGel onto the brush and agitate the wheel and tyre and work
into a high foam ensuring all areas are cleaned. Then take your EZ Wheel
Brush, spray BriteGel onto the brush and agitate the back rims of the
wheel again ensuring all areas including behind spokes/faces and between
calipers are totally cleaned. When your wheel is cleaned thoroughly
pressure rinse all the wheel and tyre including.
As you may now
notice your brushes will be black and covered in the most horrible dirt,
grime and brake dust! A thorough rinse in your wheels bucket to rise
off the residue and your good for next wheel. We practice this technique
when cleaning wheels here at Autobrite and always recommend cleaning
one wheel at a time. This way the wheel is completely clean and your not
going to miss any parts whilst in the process, get the job done and
move to the next one.
When you have finished cleaning all of the
wheels, give them a wipe and dry with your Mini Reaper to avoid water
spotting. To finish your wheels off, a coating of Blendz wheels sealant
and Endurance Trim & Tyre Gel on the tyres and your good to go!
For
a more intense, deep wheel clean and de-contamination, follow our
decontamination procedure with products such as Purple Rain Version 3,
Just The Tonic as a de-tar remover, clay you will need our Purple Rain
Version 3, our Just The Tonic Tar remover then our fine cleaner clay
along with Berry Blast QD for complete decontamination. You can always
step up with a coating of our Blendz Wheel Sealant or our Hellshine
Whe'elzebub Sealant to give your wheels that protected, gleaming finish
and also to help reduce brake dust build up. Future wheel cleaning will
also benefit from this procedure making them easy to clean.
BriteGel is designed to be ready to use and requires no dilution.
Do not apply BriteGel to hot wheels or in high temperatures. Allow the wheels to cool before use.