AutoBrite - SuperSheen - Interior & Exterior Quick Gloss Dressing 500ML

Super Sheen is a superb interior and exterior dressing for all plastic, vinyl and rubber surfaces. It leaves a rich gloss and super shine to all surfaces with minimum effort. Ideal for interior plastics, exterior plastics, under arches, tyres & engine compartments, It produces a longer lasting shine that puts the finishing touches on any detail. Can be applied using the supplied spray trigger or using a trim dressing applicator.

Dries in minutes and leaves a high gloss non tacky/greasy surface.

HOW TO USE

Super sheen High Gloss Dressing, can be applied to both interior and exterior plastics and vinyl. For interior use we recommend applying using a microfibre applicator pad or towel, spray directly onto your chosen applicator, spread the product evenly over the surface taking care not to apply the product to any control surfaces of the vehicle. For a high gloss finish spray, apply and leave to dry, If a less glossy finish is required lightly buff with a clean lint free towel after application to achieve a semi gloss finish.

For exterior use we recommend application using a foam applicator, spray directly onto the applicator and proceed to work the product evenly into the area to be treated. The product will be touch dry in a few minutes, allowing application of a second coat if required for that ultimate high gloss finish.

For engine bay use, spray directly onto surfaces to be dressed, taking care not to over apply the product as runs may occur. Once the surface has been dressed, buff with a microfibre towel to achieve the desired finish. For wheel arch dressing, spray directly onto the wheel arch liner and allow to dry naturally, avoid over application to prevent runs.

For use as a tyre dressing we recommend applying the product using one of our foam waffle tyre applicators. Super sheen can be layered to give the desired level of gloss.