AutoBrite - Pink Sheen - Interior Satin Dressing 500ML

Pink Sheen is a is a versatile, specialist silicone based cleaner and satin dressing for interior & exterior plastics, vinyl and rubber surfaces. Pink Sheen will leave a professional 'as new' look to your car and leaving it smelling so good. Pink Sheen is also ideal for all your cockpit areas such as dash boards, consoles, instrument clusters & door panels. Pink Sheen also works very well on your engine bay plastics and rubber hoses. 

Pink Sheen is a sprayable dressing that requires to be sprayed on surfaces, then wiped and buffed with a microfibre towel. Or to avoid contact with other parts of the car such as glass etc, Pink Sheen can also be applied to a microfibre towel then wiped and buffed onto the surface. Pink Sheen will leave a non-greasy, non-sticky finish but will leave that elegant, satin look. 

Pink Sheen also prevents dashboards from cracking, fading and splitting due to its protection characteristics. Pink Sheen cleans, enhances and protects.

HOW TO USE

We recommend applying Pink Sheen to a microfibre towel for all interior surfaces, spraying any product to the surface will only cause unwanted, wasteful mess. Applying it to a towel will give you precise application and control to create your desired look and finish. However other surfaces you can apply Pink Sheen to the surface and wipe/buff for the desired finish.

Below we have created some recommendations on applications for Pink Sheen. Ensure all areas to be treated are clean and dry. If the area is dirty, reach for Autobrite FAB and clean the surface.

Interior plastics - Spray Pink Sheen onto the microfibre towel - approx 1-2 sprays and wipe the surface, this will leave a lovely matt- light satin finish. Apply more product to the towel to leave a more desirable deep, dark, rich satin finish. 

Exterior plastics and rubber surfaces - Depending on the size of the surface, spray onto the surface and wipe/buff for the desired finish, for smaller surfaces spray Pink Sheen directly onto the microfibre applicator and apply. 

Rubber matt surfaces - Make sure your rubber mats are clean and dry, apply Pink Sheen to the area approx 1-2 sprays, wipe and buff for your desired finish. Make sure you wipe any excess away, avoid spraying Pink Sheen on any foot pedals.

Engine Plastics - Depending on the size of the surface, spray onto the surface and wipe/buff for the desired finish, for smaller surfaces spray Pink Sheen directly onto the microfibre applicator and apply. 
This will create that elegant, non-greasy finish to your engine plastics and rubber surfaces.