KW Variant 1 "inox-line" 102800CH
Sporty handling combined with outstandinglooks. With factory pre-configureddamping.
The KW coilover kit Variant 1"inox-line" is our entry model for more driving pleasure with anattractive and individually adjustable lowering. Due to itshigh-quality finish, the use of struts made from stainless steel,corrosion resistant springs and bump stops as well as compatiblecomponents stands for long driving pleasure - not just the car'slife.
Continuous lowering
With the KW coilover Variant 1 you can achievemaximum lowering in the tested adjustment range. Depending onvehicle model this varies between 30 to 70mm or 50 to 90mm. Evenafter years you can adjust the height quickly and easily due to thedirt resistant trapezoid thread and composite collar. Lowering atthe front axle is made using our one piece composite heightadjuster, on the rear axle this is the same unless the car has aseperate spring and shock absorber. The supplied rear heightadjuster sits either above or below the rear spring.
The KW coilover kit Variant 1"inox-line" is our entry model for more driving pleasure with anattractive and individually adjustable lowering. Due to itshigh-quality finish, the use of struts made from stainless steel,corrosion resistant springs and bump stops as well as compatiblecomponents stands for long driving pleasure - not just the car'slife.
Continuous lowering
With the KW coilover Variant 1 you can achievemaximum lowering in the tested adjustment range. Depending onvehicle model this varies between 30 to 70mm or 50 to 90mm. Evenafter years you can adjust the height quickly and easily due to thedirt resistant trapezoid thread and composite collar. Lowering atthe front axle is made using our one piece composite heightadjuster, on the rear axle this is the same unless the car has aseperate spring and shock absorber. The supplied rear heightadjuster sits either above or below the rear spring.
Article currently not available, delivery time of up to 8 weeks can be expected
- For cars with a strut clamp diameter of 50mm on the front axle
- For cars with multi-link rear axle
| Model | Engine | Performance | Four wheel drive |
| GOLF VIII (CB1) (07/2019-) | 1.0 TSI | 66 KW | No |
| GOLF VIII (CB1) (07/2019-) | 1.0 TSI | 81 KW | No |
| GOLF VIII (CB1) (07/2019-) | 1.5 TSI BlueMotion | 110 KW | No |
| GOLF VIII (CB1) (07/2019-) | 1.5 TSI BlueMotion | 96 KW | No |
| GOLF VIII (CB1) (07/2019-) | 1.5 eTSI | 110 KW | No |
| GOLF VIII (CB1) (07/2019-) | 2.0 TDI BlueMotion | 110 KW | No |
| GOLF VIII (CB1) (07/2019-) | 2.0 TDI BlueMotion | 85 KW | No |