The Autobrite Just The Tonic Tar & Glue remover is an excellent,
fast acting solvent-based product that quickly dissolves tar upon
contact. It removes the most stubborn, heavy deposits of tar from the
car with ease. Its fast acting formula works so well when contact with
tar, it simply dissolves before your eyes. Also Just The Tonic is
effective of removing transport wax, glue residue from stickers from
windows and not many people know this but if you have an ink or oil
stain on your carpet in your car, Just The Tonic will remove them with
ease! Just The Tonic will even break down and remove chewing gum from
carpets and interiors, a top tip there from AD!
When using Just
The Tonic in the preparation stages and because of tonic's fast reaction
time at dissolving tar, there is no contact and certainly no rubbing or
scraping the tar from the car so this is a massive bonus and an
extremely effective way of removing contaminants such as tar. No
scrapes, no scratches and your not inflicting any further damage to the
paintwork
HOW TO USE
Just the tonic is used after the Purple Rain decontamination process and
removes tar deposits from exterior paintwork and alloy wheels. It
rapidly breaks down by dissolving the tar into black streaks which then
are easy to remove by simply wiping away with a standard work towel.
Just The Tonic also removes any brown tarnishing that is present on the
surface, dissolving it upon contact.
Apply Just The Tonic to the
surface liberally to the affected areas, leave the product to work for
up to 2-3 minutes, Just The Tonic will start to work instantly. Do not
let the product to dry on the surface, if you do leave the product on
longer than the recommend time - re apply more Just The Tonic to the
surface and remove with a work microfibre towel.
If the tar
deposits are still present, you may need to re-apply for a second coat.
In some cases, tar is more difficult to remove. A blast with Just The
Tonic to leave a clean tar free area!
Just The Tonic will degrade if not remove your waxes or sealants on the surface and you may need to re-apply.