AutoBrite - Purple Rain 3.0 - Gel Based Fallout Remover 500ML
£8.33
- Ex Tax: £8.33
- Brand: AUTOBRITE DIRECT
Purple Rain version 3 is a new intensive pH balanced (pH
6-7) iron-contaminate remover that removes contaminants upon contact.
The rapid, reactive new formula gel when applied clings to the surface
and rapidly breaks down industrial fallout, rail dust, iron contaminates
(ferrous iron metal parts), airborne chemical compounds and other forms
of contamination. The iron contaminates begin to embed themselves into
the surface under high temperatures and potentially can cause long term
damage, Purple Rain 3 Gel will react and dissolve these contaminates
instantly.
Purple Rain 3 is suitable for all exterior paintwork
including glass, aluminium alloy wheels (not bare aluminium), clear
coated alloy wheels, stainless steel, plastic panels, exhausts tips and
even rubber surfaces, in fact where iron contaminates lie, Purple Rain 3
will dissolve them and remove them when pressure rinsed. Purple Rain 3
also contains cleaners and degreasers to help cut through dirt and
grime, the thick gel liquid creates a unique high foam formula that
sticks to the surface & penetrating into the dirt/grime and removing
easily under a pressure rinse. Purple Rain 3 is the perfect all round
cleaner & contaminate remover.
HOW TO USE
Purple Rain 3 is easy to use and ideal in the vital decontamination
process. It works so well with our Just The Tonic and our cleaner clay
to remove all unwanted contamination.
Purple Rain sets to work as soon as its applied to the surface, pulling the contamination off in a purple/red colour streak.
Clean
your wheels thoroughly with one of our AD wheel cleaners along with the
DBS brush set and the EZ wheel brush. When your wheels are clean and
free from dirt and dry, apply Purple Rain 3 liberally to the surface,
make sure the surface is cool before application. When Purple Rain 3 is
applied on the surface the product starts to react with the contaminants
immediately, This procedure will last approx 3-4 minutes (do not let
the product completely dry out), then the purple/red colour will start
to fade, at this point its time to remove the excess residue from the
surface by rinsing or you can agitate the surface with our DBS brush set
and EZ brush to remove stubborn contamination from alloy wheels or a
standard microfibre towel from the paintwork. Thoroughly pressure rinse
the entire surface when the clean is completed.