|

VIBRATECHNICS

This is a significant upgrade to the OEM gearbox mount. It is suitable for all manual transmissions and retains the original battery box fixing. The mount significantly reduces gearbox movement improv..

£141.60

This right hand side mount is a direct replacement for the OEM hydraulic engine mount. Designed to complement the other two Vibra-Technics mounts it significantly reduces engine movement and is much s..

£151.20

This is a complete torque link (not an insert) and has been developed from our previous version to give significantly improved vibration isolation performance over its predecessor. This link has been ..

£112.80

Direct replacement for the original mount. This uprated competition mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It also g..

£200.40

Direct replacement for the OE mount. This uprated mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It also gives vastly superi..

£270.00

Direct replacement for the original VW mount. This uprated competition mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It als..

£290.40

Direct replacement for the OE mount. This uprated competition mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It also gives v..

£172.80

This part replaces the front bush on the Golf MK4,5 &6 dog bone link. It has substantially higher load capacity and stiffness to reduce engine movement whilst the double bonded rubber element still is..

£45.00

Uprated mounting direct replacement for the gearbox side. Reduces movement in all directions whilst still retaining some noise and vibration isolation. It also gives vastly superior comfort and isolat..

£225.60

Direct replacement for original mounting. Uprated stiffness in all directions significantly reduces engine movement. Should be used with RHS mount VAG512MX and rear torque link insert VAG522MXReplaces..

£236.40

Direct replacement for the Original mount. This uprated engine mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It also gives ..

£282.00

Competition version of VAG504M for motorsport applications.Direct replacement for the OE mount. This uprated mount will reduce engine movement in all directions - giving less stress on exhaust etc and..

£296.40

Direct replacement for original mounting - including mounting for emmisions canistor. Reduces engine movement in all directions. It also gives vastly superior comfort and isolation from engine vibrati..

£225.60

Competition versionDirect replacement for original mounting - including mounting for emmisions canistor. Reduces engine movement in all directions.Replaces OEM part number:- 1K0199262M,AM..

£236.40

Direct replacement for original part ( can just about be done with cross member in place - but easier if removed)Reduces engine pitching back and forwards - essential for performance driving.The use o..

£153.60

Direct replacement for the original mount. This uprated mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It also gives vastly ..

£145.20

Direct replacement for the OE mount. This uprated mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It also gives vastly superi..

£129.60

The Golf front mount reacts a large proportion of the accelaration and overrun torque and has to carry a proportion of the powertrain weight. The original VW mount was always going to be a compromise!..

£159.60

As VAG750M except this is approximately 3 times stiffer - for competition use where loads are higher and comfort is a low priority!Replaces OEM mount:- 191199279C, 357199279C, 1GD199279A..

£168.00

The 'Must Have' mount for putting a VR6 into a MkII. Details as VAG750M except this mount has a higher load carrying capacity. Fitment requires modification to the VR6 engine bracket to fit the new mo..

£159.60

This is a 'triple bonded' bush to give a higher ratio of lateral to vertical stiffness. Allowing full suspension movement whilst giving very high fore aft and lateral stiffness to give good wheel cont..

£118.80

As VAG875M but approximately twice as stiff - for competition use where loads are higher and comfort is low priority! It also gives vastly superior comfort and isolation from engine vibration over inf..

£93.60

This LH rear mounting carries a proportion of the powertrain weight and reacts fore-aft and lateral forces. By combining a differential stiffness fore-aft to laterally and with some compliance vertica..

£85.20

As VAG885M except approximately twice the stiffness - for competition use where loads are higher and comfort is a low priority!Replaces OEM part number:- 357199262, 1H0199262 (A,D,F,&K)..

£99.60

This RH rear mounting carries a proportion of the powertrain weight and reacts fore-aft and lateral forces. By combining stiffness fore-aft and laterally with some compliance vertically we are able to..

£84.00

The standard rear beam bushes are designed to give some rear compliance steering for safer car control by the 'general' driver. To eliminate this and give the car a much tighter and responsive feel Vi..

£171.60

The Golf front mount reacts a large proportion of the accelaration and overrun torque and has to carry a proportion of the powertrain weight. The original VW mount was always going to be a compromise!..

£159.60

The Golf front mount reacts a large proportion of the accelaration and overrun torque and has to carry a proportion of the powertrain weight. The original VW mount was always going to be a compromise ..

£159.60

As VAG940M except approximately 3 times as stiff - for competition use where loads are higher and comfort is low priority! Can be used for all engine variants in MkIII/Corrado.Replaces OEM part number..

£168.00

This Right Hand Rear mounting carries a proportion of the powertrain weight and reacts fore-aft and lateral forces. By combining stiffness fore-aft and laterally with some compliance vertically we are..

£147.60
Showing 1 to 30 of 32 (2 Pages)